What is ‘wine service’? Experts define it as the way a bottle of wine is served to a gathering of guests. Wine service must include the handling of the bottle itself. Based on this definition, if you were to order a glass of wine in a restaurant, this would not be included under the definition of wine service. Instead, it is considered in the definition of ‘bar service’, perhaps a discussion for another day.

The wine service process begins with the selection of the wine, either from a list or by the recommendation of the restaurant wine steward or sommelier, or in the case of a private gathering, your host.

The first step is for the server or host to open the bottle of wine. They begin by removing the foil or capsule covering the cork using a knife or foil cutter. Then they make a clean cut just below the lower lip of the bottle to expose the cork fully.

When serving flat wine (wine with no bubbles), they insert the corkscrew by positioning the tip of the corkscrew at the center of the cork. Gentle pressure is applied and the corkscrew is twisted clockwise until the screw is fully embedded in the cork.

With the corkscrew securely in place, it is rotated approximately six half turns to ensure a firm grip on the cork. Then utilizing the lever arm of the corkscrew, the cork is slowly and steadily lifted upwards. Even pressure should be applied to prevent the cork from breaking or crumbling.

After removing the cork, the neck of the bottle should be inspected for any cork leftovers. A clean napkin or cloth should be used to gently wipe away any residue to ensure a pristine pour.

With the wine glass sitting on the table, the server’s dominant hand should grasp the bottom half of the wine bottle. The other hand holds a cloth napkin below the lip of the bottle to avoid dripping.  The bottle should be placed over the wine glass and slowly and steadily turned down over the glass and the wine poured in the center or all along the side. The label should be turned forward, making it visible to the person being served in order to identify the wine that is being poured.

In the typical wine glass, the spread between the rim and the stem is generally the widest at the line for serving 150 millilitres (5 ounces). When the pour is complete, the bottle should be tilted up with a twist and the lip wiped with the napkin.

If serving a sparkling wine, it should be served chilled. An ice bucket is useful in this situation. The bottle needs to be opened gently and slowly, pressing the cork with the thumb while it is gradually being removed due to the pressure inside the bottle. The bottle should be tilted at a 45-degree angle to ensure that wine does not escape from the bottle. Pour the wine slowly and uniformly while holding the glass slightly tilted. This will help prevent the wine from spilling over the rim of the glass.

Once the last of the guests’ glasses are filled the wine service is complete.

Sláinte mhaith